m5paper v1.1 specific changes

This commit is contained in:
C committed 2026-07-04 11:30:46 -07:00
1 parent f73d4821b8
commit a6acce5166
1 file changed
+37 -53
+37 -53
View File
@@ -1,12 +1,26 @@
#include <M5Unified.h> // =======================================================
// M5Paper Stock Ticker - M5Paper v1.1 (classic ESP32) edition
// =======================================================
// Target: M5Paper ESP32 Development Kit V1.1 (SKU K049-B)
// - ESP32-D0WDQ6-V3, 540x960 @4.7" e-ink (IT8951E), BM8563 RTC
//
// Difference vs. the main sketch (../m5paper-stockticker.ino):
// The classic M5Paper's low-power management differs from newer boards,
// so sleep/wake is handled through M5Unified's board-aware power API
// (M5.Power.deepSleep) instead of a raw esp_deep_sleep_start() with a
// manual radio teardown. deepSleep() puts the e-ink panel to sleep and
// drops the board to its rated ~10uA deep-sleep state, waking on the
// ESP32 RTC timer (any duration, so overnight/weekend sleeps are fine).
//
// Everything else - portfolio, market-hours logic, layout - is identical.
// Copy your config.h (and images.h) into this folder before flashing.
// -------------------------------------------------------
#include <M5Unified.h>
#include <WiFi.h> #include <WiFi.h>
#include <WiFiClientSecure.h> #include <WiFiClientSecure.h>
#include <HTTPClient.h> #include <HTTPClient.h>
#include <ArduinoJson.h> #include <ArduinoJson.h>
#include <time.h> #include <time.h>
#include <esp_sleep.h>
#include <esp_bt.h>
#include <esp_wifi.h>
#include "images.h" #include "images.h"
#include "config.h" #include "config.h"
@@ -21,6 +35,10 @@ const char* ntpServer = "pool.ntp.org";
const long gmtOffset_sec = GMT_OFFSET_SEC; const long gmtOffset_sec = GMT_OFFSET_SEC;
const int daylightOffset_sec = DAYLIGHT_OFFSET_SEC; const int daylightOffset_sec = DAYLIGHT_OFFSET_SEC;
// If WiFi/NTP fails, retry after this many seconds instead of powering off
// (the classic M5Paper's powerOff needs a manual button press to restart).
#define WIFI_RETRY_SECONDS 900 // 15 minutes
// ------------------------------------------------------- // -------------------------------------------------------
// Portfolio - symbol / shares / total cost basis ($) // Portfolio - symbol / shares / total cost basis ($)
// ------------------------------------------------------- // -------------------------------------------------------
@@ -47,38 +65,6 @@ const int NUM_STOCKS = sizeof(myPortfolio) / sizeof(myPortfolio[0]);
// ------------------------------------------------------- // -------------------------------------------------------
struct StockData { float price, change, pct; bool valid; }; struct StockData { float price, change, pct; bool valid; };
void prepareForSleepAndEnter(uint64_t sleepUs) {
// Disable all wake sources first, then allow only timer wake.
esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_ALL);
esp_sleep_enable_timer_wakeup(sleepUs);
// Shut down radios and protocol stacks.
WiFi.disconnect(true, true);
WiFi.mode(WIFI_OFF);
esp_wifi_stop();
esp_wifi_deinit();
btStop();
esp_bt_controller_disable();
esp_bt_controller_deinit();
// Power down optional domains where this core/target exposes them.
#ifdef ESP_PD_DOMAIN_RTC_PERIPH
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF);
#endif
#ifdef ESP_PD_DOMAIN_RTC_FAST_MEM
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_FAST_MEM, ESP_PD_OPTION_OFF);
#endif
#ifdef ESP_PD_DOMAIN_RTC_SLOW_MEM
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_SLOW_MEM, ESP_PD_OPTION_OFF);
#endif
#ifdef ESP_PD_DOMAIN_XTAL
esp_sleep_pd_config(ESP_PD_DOMAIN_XTAL, ESP_PD_OPTION_OFF);
#endif
esp_deep_sleep_start();
}
bool fetchStock(const char* sym, StockData& out) { bool fetchStock(const char* sym, StockData& out) {
out = { 0.0f, 0.0f, 0.0f, false }; out = { 0.0f, 0.0f, 0.0f, false };
if (WiFi.status() != WL_CONNECTED) { Serial.println("[FH] no WiFi"); return false; } if (WiFi.status() != WL_CONNECTED) { Serial.println("[FH] no WiFi"); return false; }
@@ -271,11 +257,11 @@ const char* marketPhase(const struct tm& et) {
return "mid"; return "mid";
} }
// Microseconds until the next market event: the opening bell (9:30 AM ET), // Seconds until the next market event: the opening bell (9:30 AM ET), midday
// midday (12:45 PM ET), or the closing bell (4:00 PM ET), whichever comes // (12:45 PM ET), or the closing bell (4:00 PM ET), whichever comes first,
// first, Mon-Fri only. We wake for these three events, so the ticker refreshes // Mon-Fri only. We wake for these three events, so the ticker refreshes three
// three times per session. // times per session.
uint64_t usUntilNextEvent(const struct tm& et) { uint64_t secsUntilNextEvent(const struct tm& et) {
const long events[3] = { EVT_OPEN, EVT_MID, EVT_CLOSE }; const long events[3] = { EVT_OPEN, EVT_MID, EVT_CLOSE };
long secsToday = et.tm_hour * 3600 + et.tm_min * 60 + et.tm_sec; long secsToday = et.tm_hour * 3600 + et.tm_min * 60 + et.tm_sec;
for (int d = 0; d <= 7; d++) { for (int d = 0; d <= 7; d++) {
@@ -287,9 +273,9 @@ uint64_t usUntilNextEvent(const struct tm& et) {
long cand = base + events[e]; long cand = base + events[e];
if (cand > 0 && (best < 0 || cand < best)) best = cand; if (cand > 0 && (best < 0 || cand < best)) best = cand;
} }
if (best > 0) return (uint64_t)best * 1000000ULL; if (best > 0) return (uint64_t)best;
} }
return 24ULL * 3600ULL * 1000000ULL; // fallback: 24h return 24ULL * 3600ULL; // fallback: 24h
} }
// ------------------------------------------------------- // -------------------------------------------------------
@@ -312,7 +298,7 @@ void setup() {
M5.Display.setTextColor(TFT_BLACK, TFT_WHITE); M5.Display.setTextColor(TFT_BLACK, TFT_WHITE);
M5.Display.setTextSize(2); M5.Display.setTextSize(2);
M5.Display.setCursor(20, 20); M5.Display.setCursor(20, 20);
M5.Display.print("WiFi connection failed."); M5.Display.print("WiFi connection failed - retrying later.");
M5.Display.setCursor(20, 55); M5.Display.setCursor(20, 55);
M5.Display.printf("SSID: %s", ssid); M5.Display.printf("SSID: %s", ssid);
M5.Display.setCursor(20, 90); M5.Display.setCursor(20, 90);
@@ -321,7 +307,8 @@ void setup() {
M5.Display.setCursor(205, 90); M5.Display.setCursor(205, 90);
M5.Display.printf("%d%%", batPct); M5.Display.printf("%d%%", batPct);
delay(2000); delay(2000);
M5.Power.powerOff(); // Don't powerOff (would need a manual restart) - nap and try again.
M5.Power.deepSleep((uint64_t)WIFI_RETRY_SECONDS * 1000000ULL, false);
return; return;
} }
@@ -420,17 +407,14 @@ void setup() {
} }
} }
// Page indicator
// M5.Display.setTextSize(1);
// M5.Display.setCursor(890, 525);
//M5.Display.print("Pa. 1/1");
M5.Display.endWrite(); M5.Display.endWrite();
delay(1000); delay(1000);
// We wake at open, midday, and close, so update now and sleep until // We wake at open, midday, and close, so update now and sleep until
// whichever event comes next (Mon-Fri). // whichever event comes next (Mon-Fri). M5.Power.deepSleep handles the
prepareForSleepAndEnter(usUntilNextEvent(etTm)); // classic M5Paper's e-ink + power-down and wakes on the ESP32 RTC timer.
WiFi.disconnect(true, true);
M5.Power.deepSleep(secsUntilNextEvent(etTm) * 1000000ULL, false);
} }
void loop() {} void loop() {}